I have a evo one installed on a 2005 Toyota Tacoma, all programming went as described in the install guide. Truck starts then dies after about 6 seconds. Flashes parking lights 4 times after shutdown. Manual says that is because of no tach signal. I have option 20 set to tactless engine monitoring. My yellow wire loop is cut for my automatic transmission and valet mode is off. I have tried different older firmware versions on bypass and remote start sides. I have tried other options with no success. I have also tried key in the ignition with ignition off and doors closed. I’m using guide 58481. I bought fortin RF kit and programmed remotes. All functions work as desired but truck does not continue to run for the period of desired run time.
i have not tried reversing tx and rx wires.
i have not tried ignition set to on with the key, then remote starting.